The alternative: Servo Cutter
Servo-Cutter Standard / Automatic
| Cutting height: | |
| SCA 900 |
90 mm |
| SCA 1602 |
160 mm |
| SCA 2002 |
200 mm |
| Working width: | |
| Standard model |
up to 2000 mm table width |
| special model |
2000-2300 mm table width |
| Speed: | |
| Automatic feed mechanism |
max. 20 m / min |
| Fast traverse |
max. 40 m / min |
| Rated capacity |
ca. 850 W |
| Connection |
230 / 240 V , 50 Hz 3-phase current |
The Wastema servo Cutter leads to substantial saving of time. High layers are cut without effort fast and efficiently.
With the servo Cutter concerns it a modified straight-knife machine, which is led at a double-jointed arm. Straight-knife machines of different manufacturers can be cultivated. Wastema uses the manufacturer KM as well as EASTMAN in measurer sizes of 5 ", 6 ", 8 " and 10 ".
The orignal machines will be modified. The Wastema measurer guidance is manufactured from a special wear-free as well as hardened steel. For of Wastema of mechanically and electrically modified cutter heads one is characteristic around approximately 65% smaller carrying support than with usual stroke-knife machines, as well as a small baseplate. This takes only 15% of the otherwise usual size.
Cutting curves is thereby substantially facilitated. Sharp corners can be usually accomplished without auxiliary cuts. The movement of the stroke-knife machine is playing easy under the fulcrum suspension with weight discharge. Depending upon individual application purpose (cotton wool cut, processing of Jean materials, conventional clothing material) different baseplates and carrying supports are available. For the double-jointed arm a torsionally stiff aluminum tubular structure is used. This provides for a low mass acceleration and facilitates the course of motion when cutting.